Grade 3 Shock and Surface / Tilt Sensor (With Hall Effect Contact)

Grade: 3

Model: SEISMO-ADVANCE-HE

This variant of the SEISMO-ADVANCE includes a hall effect sensor in addition to its vibration and tilt sensing abilities, allowing the device to function as a Grade 3 surface contact. See the YouTube video below for an overview of the featureset and installation guidance.

Grade 3, Environmental Class II
Complies with EN50131-2-8:2016, EN50131-2-6:2008 & PD6662:2017 standards
Hall effect sensor may be enabled or disabled as per installer preference
Sensitivity adjustable by on-board potentiometer
Selectable EOL, Alarm and Fault resistors for most major panel configurations
Rear tamper detection via breakaway PCB
LED output governed by on-board shunt or terminal wired to configurable output from panel
Suitable for mounting in the ‘V BOX’
Pulse count/double knock shunt selectable on PCB – 1, 2, 4 or 6 triggers over 30s rolling window to activate
Configurable as vibration only, tilt only, vibration or tilt, vibration and tilt
Fault output wirable standalone or as part of EOL loop
Latch terminal – offers indication of alarm when system unset (suitable or configurable output at panel required)
Heartbeat/Comfort LED configurable via board shunt.
EOL Resistor options: 1k,2k2,4k1,4k7,5k6
Alarm Resistor options: 1k,2k2,4k1,4k7,5k6,6k8
Fault Resistor options: 2k2,3k,6k8,12k
Dimensions(mm): 88 x 25 x 22.8
Also available in Brown, Black or Anthraciite Grey (RAL7016) – please contact us for further details

NOTE: SEISMO ADVANCE DOES NOT SUPPORT FULLY EOL MONITORED WIRING IN SERIES / SHARED ZONE CONFIGURATION.