Please click on the links below to download the relevant document for this product
Grade 3 Shock and Surface / Tilt Sensor (With Hall Effect Contact)
Grade: 3
Model: SEISMO-ADVANCE-HE
This variant of the SEISMO-ADVANCE includes a hall effect sensor in addition to its vibration and tilt sensing abilities, allowing the device to function as a Grade 3 surface contact. See the YouTube video below for an overview of the featureset and installation guidance.
- Grade 3, Environmental Class II
- Complies with EN50131-2-8:2016, EN50131-2-6:2008 & PD6662:2017 standards
- Hall effect sensor may be enabled or disabled as per installer preference
- Sensitivity adjustable by on-board potentiometer
- Selectable EOL, Alarm and Fault resistors for most major panel configurations
- Rear tamper detection via breakaway PCB
- LED output governed by on-board shunt or terminal wired to configurable output from panel
- Suitable for mounting in the ‘V BOX’
- Pulse count/double knock shunt selectable on PCB – 1, 2, 4 or 6 triggers over 30s rolling window to activate
- Configurable as vibration only, tilt only, vibration or tilt, vibration and tilt
- Fault output wirable standalone or as part of EOL loop
- Latch terminal – offers indication of alarm when system unset (suitable or configurable output at panel required)
- Heartbeat/Comfort LED configurable via board shunt.
- EOL Resistor options: 1k,2k2,4k1,4k7,5k6
- Alarm Resistor options: 1k,2k2,4k1,4k7,5k6,6k8
- Fault Resistor options: 2k2,3k,6k8,12k
- Dimensions(mm): 88 x 25 x 22.8
- Also available in Brown, Black or Anthraciite Grey (RAL7016) – please contact us for further details
NOTE: SEISMO ADVANCE DOES NOT SUPPORT FULLY EOL MONITORED WIRING IN SERIES / SHARED ZONE CONFIGURATION.
Please click on the links below to view the relevant videos